Target Networking

  1. Obtain the Destination Environment Private IP Address from the Event Engine dashboard. In this step, we will define the target environment IP address, subnet mask, and default gateway. Run the command below, where the [DESTINATION IP ADDRESS] is the IP address obtained from the Event Engine dashboard.
ifconfig hme0 [DESTINATION IP ADDRESS] netmask 255.255.255.0 up

Charon SSP Connection

If you need assistance obtaining information from the Event Engine dashboard, please see the Getting Started: Login section of this lab.

  1. Configure a network route for the default gateway by executing the command below.
route add default 10.1.80.1 1

Charon SSP Connection

  1. Verify the network configuration by running the following commands below
ifconfig –a
ping 10.1.80.1

Charon SSP Connection

This concludes the network configuration for our Target Solaris environment. The server has been configured with the proper network settings for the target environment and it can reach its gateway successfully. Please refer to Environment Details for a network architecture of source and target environments for this lab.